Loom Solar Panels: Price & Review (2026)

What is Loom Solar and who is it for?

Loom Solar is one of India’s best-known direct-to-consumer (D2C) solar brands. Where most panel makers sell only in bulk through installers, Loom built its name doing the opposite: letting an ordinary homeowner in Jaipur, Patna or Coimbatore buy a single panel online, get it delivered, and wire up a small system themselves. That D2C, “solar for everyone” positioning is the whole point of the brand — and it tells you exactly who Loom suits best. If you want a 1–3 kW home system, a shop backup, an off-grid cabin, or you’re a hands-on DIY buyer, Loom is squarely in your lane. If you’re commissioning a large turnkey rooftop, you’ll want to weigh it against full EPC bundles too (more on that below).

Loom Solar manufactures panels in India and sells a mix of Mono PERC and higher-efficiency bifacial modules, alongside inverters, lithium batteries and complete kits. For this page we’re focused on the panels — the part of the system that lasts 25 years and that you least want to get wrong.

The Loom Solar panel range explained

Loom’s line-up is easy to understand once you split it by technology. Broadly you’ll see two families:

• Mono PERC panels — the workhorse. Mono PERC (Passivated Emitter and Rear Cell) is today’s mainstream residential technology: good efficiency, good low-light performance, sensible price. This is what most home buyers actually need.
• Shark / bifacial (mono half-cut, TOPCon-class) panels — Loom’s premium range. Half-cut cells and bifacial glass-on-glass construction squeeze out more generation per square metre and shrug off partial shading a little better. Worth it when roof space is tight or you want maximum output.

Here’s an indicative snapshot. Wattages and prices move constantly, so treat every figure as indicative 2026 — verify current on the seller’s page before you buy.

(Indicative 2026 — verify current. Prices vary by wattage, quantity, offers and delivery.)

The small-panel end of the range is genuinely handy and something bigger brands rarely bother with — a farmer needing a 40W panel for a light, or a hobbyist building a 12V setup, can just add one to cart.

What will a real system cost?

Buying panels is only part of the story. For a full grid-tied home system, budget on ₹55,000–₹75,000/kW installed before subsidy (indicative 2026 — verify current), which covers panels, inverter, mounting structure, cabling and labour. A 3 kW system in Jaipur running against a ₹3,000/month bill, for example, generates roughly 12 units/day (~4 units per kW), which can wipe out most of that bill and pay back in about 3–4 years after subsidy.

On subsidy: under PM Surya Ghar: Muft Bijli Yojana, residential rooftop got ₹30,000/kW for the first 2 kW plus ₹18,000 for the 3rd kW, capped at ₹78,000 for 3 kW and above. Important caveat for 2026 — new registrations closed on 6 June 2026 after 40 lakh+ homes were solarised. If you registered earlier you may still be in the pipeline; if not, verify the current status with your DISCOM before assuming subsidy. Note too that subsidy and net metering require ALMM-listed, DCR (domestic content) panels and an on-grid system — check that the specific Loom SKU you pick is DCR/ALMM-compliant if subsidy matters to you. A quick run through a rooftop solar calculator will size your system and savings before you commit.

Warranty and after-sales support

Loom panels typically carry a ~25-year linear performance warranty and a 10–12-year product warranty (indicative 2026 — verify current) — in line with industry norms and better documented than most unbranded imports. Because Loom is a recognised brand with a dealer and service network across major states, warranty claims are more traceable than with a no-name panel bought off a marketplace.

That said, honest advice: read the warranty document, not the ad. Confirm the exact product-warranty years, the guaranteed year-25 output (usually ~80–85%), who handles a failed panel (brand vs. your installer), and turnaround expectations. For DIY buyers, remember the warranty covers the panel — your workmanship, structure and wiring are on you, so it’s worth paying a local electrician for a safe install even if you source the panels yourself.

How Loom compares to its peers

Against commodity/tier-2 panels, Loom charges a modest premium — you’re paying for brand accountability, documentation and easy single-piece availability. Against large domestic majors (the brands that dominate utility-scale and big EPC rooftops), Loom is often not the cheapest per watt on a large job, because those players buy and install at scale. Where Loom clearly wins is the small and DIY segment: try buying one panel, with delivery and a real warranty, from a utility-scale brand and you’ll see the difference.

So the neutral framing is this: Loom competes on accessibility and service, not on being the rock-bottom-cheapest panel. For a hands-on 1–3 kW buyer that trade-off is usually worth it. For a hands-off buyer wanting a subsidised turnkey rooftop, put a Loom-based quote alongside two local EPC quotes and compare the all-in number.

Common mistakes to avoid

• Assuming any Loom SKU qualifies for subsidy — only ALMM/DCR-listed, on-grid configurations do. Verify the specific model.
• DIY-installing a grid-tied system without net metering — you need DISCOM approval (deemed feasible up to 10 kW for homes; approval typically 15–45 days) or you won’t get billing credit.
• Under-sizing to save money — a 2 kW system on a heavy-use home leaves savings on the table; size to your actual bill.
• Skipping the structure — a cheap mounting frame that rusts or lifts in wind will outweigh any panel saving.

Who should buy Loom Solar panels?

Buy Loom if you’re a DIY or small-system buyer — a 1–3 kW home, a shop, an off-grid or backup setup, or you’re expanding an existing array and want matching panels shipped to your door. Loom is also a sound pick if brand accountability and clear warranty documentation matter more to you than shaving the last few rupees per watt.

Look wider if you’re commissioning a large, hands-off, subsidised rooftop — get three free quotes so a Loom-based build competes fairly with local EPC bundles on the final installed price. Either way, insist on ALMM/DCR compliance if you’re claiming subsidy, and get the warranty in writing.